Home
ꄲ
Prefilters
ꄲ
Prefilter Family Filter(PP)
ꄲ
Prefilter Family Cartridge Filter(PP)
ꄲ
Prefilter Family Cartridge Filter(PP)
Prefilter Family Cartridge Filter(PP)
Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.
Key Features and Benefits
- Wide chemical capability
- High retention efficiency, fast flow and low flow differential pressure
- High thermal stability: compatible with multiple times of steam-in-place and autoclave sterilization
- No fiber releasing
- Robust with stable performance
- Pore size: 0.1 μm / 0.2 μm / 0.45 μm / 1.0 μm / 3.0 μm / 5.0 μm /10.0 μm / 20.0 μm / 50.0 μm
- Flexible options in filter format and specs: Cartridge, Capsule and Disc
- Traceable with unique code on each filter
Typical Applications
- Pre-filtration of process liquid
- Pre-filtration of blood products
- Pre-filtration of cell culture media
- Pre-filtration during solution preparation
Product Characteristics
Size in inch | 2.5 inch | 5 inch | 10 inch | 20 inch | 30 inch |
Nominal Dimensions | 69mm*2.5″ | 69mm*5″ | 69mm*10″ | 69mm*20″ | 69mm*30″ |
Filtration Area | 0.12 m2 | 0.25 m2 | 0.5 m2 | 1.0 m2 | 1.5 m2 |
Pore Size | 0.1 μm / 0.2 μm / 0.45 μm / 1.0 μm / 3.0 μm / 5.0 μm / 10.0 μm / 20.0 μm / 50.0 μm | ||||
Connector Type | 226 / 222 / DOE | ||||
Materials of Construction | Filter membrane: Polypropylene (PP) Supporting layer & cage/ adapter: Polypropylene (PP) O-ring: Silicone/EPDM/Ternary Fluorine Rubber |
||||
Highest Working Temperature | 60°C | ||||
Max Inlet Pressure | 80 psi @ 25°C | ||||
Sterilization | Device integrity was maintained after 5 wet autoclave / SIP cycles of 60 min @ 126°C | ||||
Max Differential Pressure | Forward: 5 bar @ 25°C, Reverse: 2 bar @ 25°C / Forward: 4 bar @ 60°C, Reverse: 1 bar @ 60°C | ||||
Endotoxin | < 0.25 EU/mL | ||||
TOC / Conductivity | TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm | ||||
Non-fiber Releasing | No detectable fibers or other visible foreign matters | ||||
Biological Safety | All components comply with the requirements for bio-safety of Class VI plastics in USP < 88 > | ||||
Quality System | Manufactured in a facility whose Quality Management System has been certified with ISO9001 | ||||
Shelf Life | 3 Years |
Ordering Information
For further information, please contact us and Alioth technical team will provide a comprehensive service for your filtration process.