Product Introduction
Alioth Alidep® Depth Filter is mainly used for the clarification step in pharmaceutical process, and its disposable design provides greater flexibility for large-scale production.
Alidep® Depth Filter has various media combinations, and is mainly composed of cellulose, filter aids, and positively charged resins. It provides strong dirt-holding capacity and may be used for the clarification of cell culture fluid.

Alioth Alidep® Depth Stacked Filters are primarily used for theclarification step in pharmaceutical processes, with stainless steelfilter housing to achieve filtration. There are a variety of sizes to meet the customer's use.

Alioth Disposable Straight-through Connector and Blind-plug Connector Sets, which are made from polypropylene, can enable the correct installation of depth filter and meet the requirements of depth filtration process when used with Alidep Depth Filter and holders.

Alioth Alipore® CHF PES prefilters can provide effective bioburden control and particle contaminants removal with good chemical compatibility and low level extractable. Alipore® CHF filters aresuitable for bioburden control and prefiltration application of various kind of fluid,provide effective protection to downstream sterilizing-grade filter and other processsystem in different steps of bioprocess. Meet the common needs of the pharmaceutical industry for liquid pre-filtration.

Alioth Stainless Steel Filter Housing is designed according to sanitary requirements and GMP requirements. Combined with various materials of diaphragms and various sizes of cartridge filters produced by Alioth, it can be flexibly used at different stages of different processes in different industries. It is extremely easy to clean and drain, poses no concerns about residual liquid, and can meet the strict requirements of key material liquid and key parts for filter housing in biopharmaceutical.

The Alioth Alipore® TAHF series features a hydrophobic and chemically inert PTFE (polytetrafluoroethylene) filter membrane. This product efficiently retains microorganisms and particles in wet or humid gas through stringent liquid bacteria retention verification. It offers high strength and resistance to multiple steam sterilizations in place. The TAHF series is suitable for sterile gas filtration and organic solvent filtration with strict quality requirements in pharmaceutical applications.

Alioth Stainless Steel Depth Filter Holder M Type is commonly used to hold depth filter holder of a specific area. With the help of a specific power source, it allows material liquid to pass through the depth filter, thus achieving the purpose of separating impurities from liquid. When used in combination with Alioth-produced depth filter, it can support the needs for different scales of production and use. Made from 316L stainless steel, it meets the requirements of pharmaceutical industry. 

Product Introduction
Alioth Membrane Holder is designed according to sanitary requirements and GMP standards. Combined with various materials and sizes of diaphragms produced by Alioth, it can be flexibly used at the diaphragm material selection stage of different processes in different industries. It is easy to clean and drain, poses no concerns about residual liquid, and can meet the relevant requirements of biopharmaceutical industry.

High Retention,Low Adsorption,Easy Operation,Gamma Sterilization

Alioth Stainless Steel Depth Filter Holder P Type is commonly used in deep depth filtration process. It is used to clamp depth filter holder of a specific area. With the help of a specific power source, it allows liquid to pass through the deep depth filter, thus achieving the purpose of separating impurities such as solid particles from liquid. 
Made from 316 L stainless steel, it is compatible with different types of liquids and meets the special requirements of pharmaceutical industry. 

Product Introduction
Alioth Membrane Filter is made from hydrophilic polyethersulfone (PES) membrane, and placed in a compatible membrane holder. It can remove particles and microorganisms from liquids, thus very suitable for the development and validation of early-stage filtration process. Besides, it can withstand multiple cycles of high-temperature and high-pressure sterilization, meeting the common requirements for liquid filtration in pharmaceutical industry.

Product Introduction
Alioth Electrical Housing Heater is a cost-effective solution featuring low maintenance. Excellent thermal control is required in biopharmaceutical process. A housing heater can prevent steam from condensing at sterile exhaust ports, process filters, and pipeline systems, thus reducing the viscosity of filtered fluid. Alioth series of sanitary electrical housing heaters provide precise temperature control, advanced heating function and heat insulation effect.

Product Introduction
Alioth Virus Filter Holder is commonly used in virus removal filtration process. It is used to hold virus filter holder of a specific area. With the help of a specific power source, it allows liquid to pass through the virus filter holder, thus achieving the goal of retaining viruses in the liquid.

Product Introduction
Alioth Loading Test Device by Constant Pressure Model (Vmax) is an accelerated experiment that uses a peristaltic pump as the source of power to maintain a constant flow rate. It is an experimental method that can determine filter capacity using a small volume of material liquid in a short period of time. The Vmax testing device developed by Alioth is a convenient, flexible, low-cost, and efficient experimental apparatus for pre-filtering/terminal filtration and selection.

Product Introduction
Alioth Ultrafiltration Cassette Holder is commonly used in ultrafiltration process. It is used to hold ultrafiltration cassette of a specific area. With the help of a specific power source, it allows material liquid to pass through the ultrafiltration membrane, thus achieving the purpose of retaining target substances.
Made from 316 L stainless steel, it can adapt well to different types of material liquids and meet the special requirements of pharmaceutical industry.

Alioth Manual Ultrafiltration System, with its modular design and flexible combination options, supports the use of filters or hollow fibers of different areas, thus realizing various filtration requirements ranging from a minimum of 0.1 m2 to a maximum of 20 m2, or even a larger area. It is operated manually, providing convenient control. Both desktopand ground-based versions are available to meet different site needs. The overall system design is compact and space-saving.

Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.

Product Introduction
Alioth Aligard® MHF Single-layer Cartridge Filter is made from mixed cellulose ester. It has a nominal filtration accuracy of 0.2 μm, a sturdy structure and stable material. It can efficiently retain pollutants, effectively remove particles and colloidal contaminants, block no important active ingredients, protect downstream filtration equipment, and prevent premature clogging.

Product Introduction
Alioth Alipore® CHC double-layer polyethersulfone (PES) filters are suitable for a variety of sterile filtration of process fluids with both cartridge and disposable capsule format available. The filter has passed strict sterilization performance validation. It features a built-in pre-filtration layer to achieve high flow rate and capacity, and thereby optimize your process efficiency and cost effectiveness.

Alioth Alipore® DHF Single-layer Cartridge Filter is a 0.2μm single-layer polyethersulfone (PES) filter that can efficiently retain bacteria (LRV > 6) and particulate contaminants. It has wide chemical compatibility and low leaching level, thus suitable for the bioburden control and pre-filtration of various fluids. It can provide more effective protection at different stages of bioprocess, prolonging the service life of sterilizing filters and safeguarding other processing systems.

Product Introduction
Alioth Alipore® CHC double-layer polyethersulfone (PES) filters are suitable for a variety of sterile filtration of process fluids with both cartridge and disposable capsule format available. The filter has passed strict sterilization performance validation. It features a built-in pre-filtration layer to achieve high flow rate and capacity, and thereby optimize your process efficiency and cost effectiveness.

Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.

The Alioth Alipore® TAHF series features a hydrophobic and chemically inert PTFE (polytetrafluoroethylene) filter membrane. This product efficiently retains microorganisms and particles in wet or humid gas through stringent liquid bacteria retention verification. It offers high strength and resistance to multiple steam sterilizations in place. The TAHF series is suitable for sterile gas filtration and organic solvent filtration with strict quality requirements in pharmaceutical applications.

Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.