Home  ꄲ  预过滤  ꄲ  PP Capsule Prefilters
7501843
넳 넲

PP Capsule Prefilters

Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.

Data Download：

Depth Stacked DataSheet
넳 넲

  • 我是段落。点击这儿添加你的文字并编辑它，非常容易。-双击进行编辑

     

    • Wide chemical capability.

    • High retention efficiency, fast flow and low flow differential pressure.

    • High thermal stability: compatible with multiple times of steam-in-place and autoclave sterilization.

    • No fiber releasing.

    • Robust with stable performance.

    • Pore size: 0.1 μm / 0.2μm / 0.45 μm / 1.0μm / 3.0 μm / 5.0 μm /10.0μm / 20.0 μm / 50.0 μm.

    • Flexible options in filter format and specs: Cartridge, Capsule and Disc.

    • Traceable with unique code on each filter.

     

  •  

    • Pre-filtration of process liquid

    • Pre-filtration of blood products

    • Pre-filtration of cell culture media

    • Pre-filtration during solution preparation

     

  • Product Characteristics

    Size in inch 1 inch 2 inch 4 inch 5 inch 10 inch 20 inch
    Nominal Dimensions Details on product image
    Filtration Area 0.03m2 0.1m2 0.2m2 0.25m2 0.5m2 1.0m2
    Pore size 0.1μm / 0.2μm / 0.45μm / 1.0μm / 3.0μm / 5.0μm / 10.0μm / 20.0μm / 50.0μm
    Connection Type TC25 mm or
    HB 7-13 mm

    TC 25 mm or

    HB 7-13 mm

    		 TC50mm TC50mm TC50mm TC50mm
    Materials of Construction Filter membrane: Polypropylene (PP)
    Supporting layer & cage/ housing: Polypropylene (PP)
    O-ring: Silicone
    Highest working temperature 60°C
    Max Inlet Pressure 80 psi @ 25°C
    Sterilization Device integrity was maintained after 5 wet autoclave cycles of 60 min @ 126°C
    Max Differential Pressure Forward: 5 bar @ 25°C, Reverse: 2 bar @ 25°C / Forward: 4 bar @ 60°C, Reverse: 1 bar @ 60°C
    Endotoxin < 0.25 EU/mL
    TOC / Conductivity TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm
    Non-fiber Releasing No detectable fibers or other visible foreign matters
    Biological Safety All components comply with the requirements for bio-safety of Class VI plastics in USP < 88 >
    Quality System Manufactured in a facility whose Quality Management System has been certified with ISO 9001
    Shelf Life 3 Years