PP Cartridge Prefilters
Product Introduction
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.
Polypropylene (PP) membrane is suitable for depth filtration with stable physical and chemical properties and strong pressure resistance. Alioth prefilters are made of PP with high porosity and strong dirt-holding capacity. The filters are ideal for removing particles and microorganisms from a broad range of challenging pharmaceutical liquids in prefiltration process.
-
-
-
Product Characteristics
Size in inch 2.5 inch 5 inch 10 inch 20 inch 30 inch Nominal Dimensions 69mm*2.5″ 69mm*5″ 69mm*10″ 69mm*20″ 69mm*30″ Filtration Area 0.12 m2 0.25 m2 0.5 m2 1.0 m2 1.5 m2 Pore Size 0.1 μm / 0.2 μm / 0.45 μm / 1.0 μm / 3.0 μm / 5.0 μm / 10.0 μm / 20.0 μm / 50.0 μm Connector Type 226 / 222 / DOE Materials of Construction Filter membrane: Polypropylene (PP)
Supporting layer & cage/ adapter: Polypropylene (PP)
O-ring: Silicone/EPDM/Ternary Fluorine RubberHighest Working Temperature 60°C Max Inlet Pressure 80 psi @ 25°C Sterilization Device integrity was maintained after 5 wet autoclave / SIP cycles of 60 min @ 126°C Max Differential Pressure Forward: 5 bar @ 25°C, Reverse: 2 bar @ 25°C / Forward: 4 bar @ 60°C, Reverse: 1 bar @ 60°C Endotoxin < 0.25 EU/mL TOC / Conductivity TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm Non-fiber Releasing No detectable fibers or other visible foreign matters Biological Safety All components comply with the requirements for bio-safety of Class VI plastics in USP < 88 > Quality System Manufactured in a facility whose Quality Management System has been certified with ISO9001 Shelf Life 3 Years