Home  ꄲ  预过滤  ꄲ  PES 0.45μm Cartridge Filters
7501841
넳 넲

PES 0.45μm Cartridge Filters

Product Specifications

  5 inch 10 inch 20 inch 30 inch

Dimensions

Diameter
Maximum Length

 

69 mm
150 mm

 

69 mm
320 mm

 

69 mm
560 mm

 

69 mm
800 mm
Filtration Area 0.32 m2 0.65 m2 1.3 m2 1.95 m2
Materials of Construction

Filter membrane: Hydrophilic polyethersulfone (PES)       

Supporting Layer: Polypropylene (PP)
O-rings of capsules vent: Silicone

Liner/Cartridge body: Polypropylene (PP)
End caps: Polypropylene/ Polycarbonate (PP/PC)
Pore Size 0.45 μm
Maximum Differential
Pressure		 Forward: 5.0 bar ( 72.5 psi ) @ 25℃ / 3.0 bar ( 43.5 psi ) @ 80℃ / Reverse: 2.0 bar ( 29.0 psi ) @ 25℃
Sterilization Parameters 135℃, 30 minutes, 10 cycles of high-pressure sterilization or 10 cycles of sterilization in place
Biological Safety All the construction components of this cartridge comply with the requirements for biological safety of Class Vl plastics in current USP < 88 >
Indirect Food Additive The primary construction components of this cartridge comply with the reguirements for food contact materials as stipulated in EU 1935 / 2004 / EC and FDA 21 CFR 177-182
Cleanliness Cleanliness meets the requirements for nonfiber releasing filter as specified in FDA 21 CFR 211.72 and 210.3 (b) (5) (6), and the level of insoluble particles in rinsing liquid meets the requirements of USP < 788 >
Endotoxin The endotoxin level of cartridge rinsing liquid is < 0.25 EU/mL as indicated by gel method, which complies with the requirements of USP < 85 >
TOC / Conductivity TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm
Manufacturing Environment Manufactured in conformance with cGMP

Test Results of Flow Differential Pressure

 

 

 

ꄴPrevious： MCE 0.45μm Cartridge Filters
ꄲNext： null
넳 넲