PP Cartridge Prefilters
Product Characteristics
| Size in inch | 2.5 inch | 5 inch | 10 inch | 20 inch | 30 inch |
| Nominal Dimensions | 69mm*2.5″ | 69mm*5″ | 69mm*10″ | 69mm*20″ | 69mm*30″ |
| Filtration Area | 0.12 m2 | 0.25 m2 | 0.5 m2 | 1.0 m2 | 1.5 m2 |
| Pore Size | 0.1 μm / 0.2 μm / 0.45 μm / 1.0 μm / 3.0 μm / 5.0 μm / 10.0 μm / 20.0 μm / 50.0 μm | ||||
| Connector Type | 226 / 222 / DOE | ||||
| Materials of Construction | Filter membrane: Polypropylene (PP) Supporting layer & cage/ adapter: Polypropylene (PP) O-ring: Silicone/EPDM/Ternary Fluorine Rubber |
||||
| Highest Working Temperature | 60°C | ||||
| Max Inlet Pressure | 80 psi @ 25°C | ||||
| Sterilization | Device integrity was maintained after 5 wet autoclave / SIP cycles of 60 min @ 126°C | ||||
| Max Differential Pressure | Forward: 5 bar @ 25°C, Reverse: 2 bar @ 25°C / Forward: 4 bar @ 60°C, Reverse: 1 bar @ 60°C | ||||
| Endotoxin | < 0.25 EU/mL | ||||
| TOC / Conductivity | TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm | ||||
| Non-fiber Releasing | No detectable fibers or other visible foreign matters | ||||
| Biological Safety | All components comply with the requirements for bio-safety of Class VI plastics in USP < 88 > | ||||
| Quality System | Manufactured in a facility whose Quality Management System has been certified with ISO9001 | ||||
| Shelf Life | 3 Years | ||||
