Stainless Steel Depth Filter Holder M Type
Product Introduction
Alioth Stainless Steel Depth Filter Holder M Type is commonly used to hold depth filter holder of a specific area. With the help of a specific power source, it allows material liquid to pass through the depth filter, thus achieving the purpose of separating impurities from liquid. When used in combination with Alioth-produced depth filter, it can support the needs for different scales of production and use. Made from 316L stainless steel, it meets the requirements of pharmaceutical industry. The equipment is simple, structurally robust, and easy to install and use. It is also compatible with common plate-type depth filter holders from other brands.
Product Properties
- Made from 316 L stainless steel
- Surface finish Ra < 1.2 μm, liquid contact surface finish Ra < 0.6 μm
- Diaphragm valves and pressure gauges, which meet cGMP's requirements for designing sanitary dead angle in the structure conforming to pharmaceutical-grade standards
- Equipped with stainless steel pipeline, and also compatible with disposable pipeline
- Equipped with hydraulic device and depth filter holder; effort-saving, safe and easy operation
- Compatible with major brands of depth filter holders in the market
- Available in a full range of specifications for laboratory research scale, clinical pilot production scale, and commercial large-scale production
- Resistant to acids, alkalis, organic solvents, etc., and meeting SIP / CIP as well as cleaning validation requirements
- Adopt industry-standard chuck interface connection
- Can be specially customized according to the requirements of customer
Product Documentation Package
- COQ
- Basic drawings of the product
- Maintenance guide and operation manual
- Calibration certificates of instruments
- Material certification documents
- Certification document of surface finish
- FDA certificate for hydraulic oil
- Seal component 2.2 certificate
- EN 10204 certificate for flow passage component
- IQ/OQ validation service and documents
- List of spare parts
- Custom files related to other customized products
Product Configuration
- Alioth depth cartridge filter is connected to process pipelines through disposable connectors, forming disposable flow passage
- Disposable separation plate allows installation of more than one filter models on a single-layer holder
Product Applications
- Clarification step in monoclonal antibody production process
- Clarification step in recombinant protein production process
- Clarification step in vaccine production process
- Clarification step in blood product production process
Product Characteristics
| Type | 2.2 m2 | 5.5 m2 | 11 m2 | 22 m2 | 33 m2 |
| Dimension (length × width × height) cm |
81x 64 x51 cm (including |
133x73x100 cm (including |
196x73x100 cm (including |
199x89x117 cm (including |
195x89x157 cm (including |
| Weight (kg) | 110-120 kg | 160-170 kg | 180-190 kg | 340-360 kg | 480-500 kg |
| Holder baffle | SS 304 | ||||
| Liquid-contacting part | SS 316 L | ||||
| Surface finish | Surface finish Ra < 1.2 μm, liquid-contacting surface finish Ra < 0.6 μm | ||||
| Equipment frame | SS 304 | ||||
Ordering Information
| Order No. | Product description | Package Quantity |
| DFHBGM 2 A 2-1 | Depth Filter Holder M Type 2.2 m2, with liquid-contacting tray at the bottom | 1 / PK |
| DFHBGM 2 A 2-2 | Depth Filter Holder M Type 2.2 m2, with liquid-contacting tray at the bottom, and valve pressure gauge | 1 / PK |
| DFHBGM 2 A 2-ET 31 | Depth Filter Holder M Type 2.2 m2, with extension rod for holding 5.5 m2, and liquid-contacting tray at the bottom | 1 / PK |
| DFHBGM 2 A 2-ET 32 | Depth Filter Holder M Type 2.2 m2, with extension rod for holding 5.5 m2, liquid-contacting tray at the bottom, and valve pressure gauge | 1 / PK |
| DFHBGM 5 A 5-1 | Depth Filter Holder M Type 5.5 m2, with liquid collection tray at the bottom | 1 / PK |
| DFHBGM 5 A 5-2 | Depth Filter Holder M Type 5.5 m2, with liquid-contacting tray at the bottom, and valve pressure gauge |
1 / PK |
| DFHBGM11 A-1 | Depth Filter Holder M Type 11 m2, with liquid-contacting tray at the bottom | 1 / PK |
| DFHBGM11 A-2 | Depth Filter Holder M Type 11 m2, with liquid-contacting tray at the bottom, and valve pressure gauge | 1 / PK |
| DFHBGM 22 A-1 | Depth Filter Holder M Type 22 m2, with liquid-contacting tray at the bottom, and U-shaped connector | 1 / PK |
| DFHBGM 22 A-2 | Depth Filter Holder M Type 22 m2, with liquid-contacting tray at the bottom, U-shaped connector, and valve pressure gauge | 1 / PK |
| DFHBGM 22 A-3 | Depth Filter Holder M Type 22 m2, with liquid collection trays at the bottom and top, and U-shaped connector | 1 / PK |
| DFHBGM 22 A-4 | Depth Filter Holder M Type 22 m2, with liquid-contacting trays at the bottom and top, U-shaped connector, and valve pressure gauge |
1 / PK |
| DFHBGM 33 A-1 | Depth Filter Holder M Type 33 m2, with liquid-contacting tray at the bottom, and T-shaped connector | 1 / PK |
| DFHBGM 33 A-2 | Depth Filter Holder M Type 33 m2, with liquid-contacting tray at the bottom, T-shaped connector, and valve pressure gauge | 1 / PK |
| DFHBGM 33 A-3 | Depth Filter Holder M Type 33 m2, with liquid-contacting trays at the bottom and middle part, and T-shaped connector | 1 / PK |
| DFHBGM 33 A-4 | Depth Filter Holder M Type 33 m2, with liquid-contacting trays at the bottom and middle part, T-shaped connector, and valve pressure gauge |
1 / PK |
| DFHBGM 33 A-5 | Depth Filter Holder M Type 33 m2, with liquid-contacting trays at the bottom, middle part and top, and T-shaped connector | 1 / PK |
| DFHBGM 33 A-6 | Depth Filter Holder M Type 33 m2, with liquid-contacting trays at the bottom, middle part and top, T-shaped connector, and valve pressure gauge | 1 / PK |
For further information, please contact us, Alioth technical team will provide a comprehensive service for your filtration process.
