PP Capsule Prefilters
Product Characteristics
| Size in inch | 1 inch | 2 inch | 4 inch | 5 inch | 10 inch | 20 inch |
| Nominal Dimensions | Details on product image | |||||
| Filtration Area | 0.03m2 | 0.1m2 | 0.2m2 | 0.25m2 | 0.5m2 | 1.0m2 |
| Pore size | 0.1μm / 0.2μm / 0.45μm / 1.0μm / 3.0μm / 5.0μm / 10.0μm / 20.0μm / 50.0μm | |||||
| Connection Type | TC25 mm or HB 7-13 mm |
TC 25 mm or HB 7-13 mm |
TC50mm | TC50mm | TC50mm | TC50mm |
| Materials of Construction | Filter membrane: Polypropylene (PP) Supporting layer & cage/ housing: Polypropylene (PP) O-ring: Silicone |
|||||
| Highest working temperature | 60°C | |||||
| Max Inlet Pressure | 80 psi @ 25°C | |||||
| Sterilization | Device integrity was maintained after 5 wet autoclave cycles of 60 min @ 126°C | |||||
| Max Differential Pressure | Forward: 5 bar @ 25°C, Reverse: 2 bar @ 25°C / Forward: 4 bar @ 60°C, Reverse: 1 bar @ 60°C | |||||
| Endotoxin | < 0.25 EU/mL | |||||
| TOC / Conductivity | TOC < 0.5 mg/L, Conductivity < 1.3 μS/cm | |||||
| Non-fiber Releasing | No detectable fibers or other visible foreign matters | |||||
| Biological Safety | All components comply with the requirements for bio-safety of Class VI plastics in USP < 88 > | |||||
| Quality System | Manufactured in a facility whose Quality Management System has been certified with ISO 9001 | |||||
| Shelf Life | 3 Years | |||||
