PES 0.45+0.2 μm Sterilizing-Grade Cartridge Filters
Product Specifications —Cartridge Filter
| Cartridge Filter (5 inch) |
Cartridge Filter (10 inch) |
Cartridge Filter (20 inch) |
Cartridge Filter (30 inch) |
|
| Dimensions Diameter Maximum Length |
69 mm |
69 mm |
69 mm |
69 mm |
| Filtration Area | 0.3 m2 | 0.6 m2 | 1.2 m2 | 1.8 m2 |
| Pore Size | 0.45+0.2 μm | |||
| Materials of Construction |
Filter membrane: Hydrophilic polyethersulfone (PES) Supporting Layer: Polypropylene O-rings of cartridges: Silicone Liner / cartridge body: Polypropylene End caps: Polypropylene / Polycarbonate |
|||
| Bacterial Retention | ＞107 cfu /cm2 B. diminuta ( ATCC® 19146TM ) | |||
| Maximum Differential Pressure |
Forward: 5.0 bar（72.5 psi）@ 25°C / 3.0 bar（43.5 psi）@ 80°C Reverse: 2.0 bar（29.0 psi）@25℃ |
|||
| Bubble Point | ≥3520 mbar（51 psi）(wetted with H2O, 20℃, compressed air） | |||
| Diffusion | Through a water wet membrane at 2760 mbar (40 psi) （20℃, compressed air ） | |||
| ≤12.5 mL/min | ≤25 mL/min | ≤50 mL/min | ≤75 mL/min | |
| Sterilization | Steam in place: 136℃, 30 min, 30 cycles Autoclave: 131℃, 30 min, 30 cycles |
|||
| Biological Safety | All the construction components of this filter comply with the requirements for biological safety of Class VI plastics in current USP <88> | |||
| Indirect Food Additive | The primary construction components of this filter comply with the requirements for food contact materials as stipulated in EU 1935 / 2004 / EC and FDA 21 CFR 177-182 | |||
| Cleanliness | Cleanliness meets the requirements for nonfiber releasing filter as specified in FDA 21 CFR211.72 and 210.3 (b) (5) (6), and the level of insoluble particles in rinsing liquid meets the requirements of USP <788> | |||
| Endotoxin | The endotoxin level of cartridge rinsing liquid is <0.25 EU/mL as indicated by gel method, which complies with the requirements of USP <85> | |||
| TOC / Conductivity | Filtrate of this filter , TOC＜0.5 mg/L, Conductivity＜1.3 μS/cm | |||
| Integrity | Filters are 100% integrity tested | |||
| Manufacturing Environment |
Manufactured in conformance with cGMP | |||
Typical Flow Characteristics
Water Flow Rate and Pressure Drop -Alipore® CHC 0.45+0.2μm Cartridge Filters
Water Flow Rate and Pressure Drop-Alioth Alipore® CHC 0.45+0.2μm Alicap L-type Capsule Filter
（KFBEC52M3**S1*）
*T1, T3, B5, B7 represent different interface types, see order information for details.
